| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Pump Displacement(ml/rev) | Motor Power(W) | L1±1(mm) | inlet and outlet dimension | N.W.(KG) | Remarks |
| 0.07 | 400 | 51.2 | Rp1/8 | ||
| 0.15/0.30 | 400 | 53.5 | Rp1/8 | ||
| 0.60 | 400 | 57.7 | Rp1/8 | ||
| 0.90 | 400 | 61.9 | Rp1/8 | Customizable Rp1/4 | |
| 1.50 | 400 | 70.9 | Rp1/4 |
| System configuration | Name | Quantity | Brand | Model | Remarks |
| human-machine interface | 1 | KinSeal | AMZ043W01 | 4.3-inch touch screen | |
| PLC | 1 | Taiwan vigor | VS1-14MT | ||
| servo system | 1 | £Factkawa750W | EC-F1X20SN8*1,EC-F3CC075V-M2XN*K | ||
| 1 | RFactkawa400W | EC-F1X15SN8*1,EC-F2CH040V-M2XN*K | |||
| power supply | 1 | Mean well | LRS-50-24 | ||
| aviation plug | 1 | GC16-4 | 4 cores (one set of input and output) |
bottom plate thickness:2mm,side plate thickness:1mm,and top plate thickness:1mm
4.Operating instructions
4-1,Boot screen Pic. 5 Boot sreen
The user can enter the corresponding Chinese or English operation page through the corresponding buttons at the bottom of the interface
4-2,Home page Pic.6 Home page
The user can enter the corresponding operation page through the corresponding buttons at the bottom of the interface.
4-3,system setting Pic. 7 System setting
(1)Rated displacement: the rated displacement of gear pump in current system.
(2)Compensation displacement: flow compensation under conveying mode; A value of + means positive compensation, and a value of - means negative compensation.
(3)Rated speed: current system servo motor rated speed.
(4)Flow unit: the unit of instantaneous flow in conveying mode.
4-4,Quantitative model Pic. 8 Quantitative model
(1)Revolution number setting: The number of turns of the motor in the quantitative mode. Theoretical number of turns = theoretical volume / rated displacement, for example: rated displacement 6.00ml/rev, quantitative 100ml, theoretical number of turns = 100 / 6 is 16.7 turns; When the number of turns is set, it can be adjusted up and down from 16.7 turns
(2)Speed setting: motor speed in quantitative mode, not higher than rated speed.
(3)Interval time: delay time between completion of each quantitative filling in automatic mode.
(4)Quantity setting: the total number of filling required in automatic mode, and the machine will stop automatically after reaching the set value. If it is set to 0, it is the manual mode, Press start once to complete parameter setting only once; At this time, the external switch signal can also control the program.
(5)Revolution completed: the number of revolution completed currently.
(6)Completed quantity: the number of completed work in automatic mode or manual mode. In the automatic mode, when the set quantity is reached, stop and press the stop key to clear the quantity.
4-5,Displacement mode Pic. 9 Displacement mode
(1) Speed setting: the speed of motor in Displacement mode.
(2)Instantaneous flow:In the conveying mode, the theoretical flow is calculated by multiplying the real-time speed of the motor and the displacement of the pump.Due to the structural characteristics of the gear pump, the greater the inlet and outlet pressure difference, the smaller actual flow is less than the theoretical flow.Traditionally, people believe that the quantitative feeding pump or metering pump is accurate. Each rotation of the pump will push a certain volume of liquid. Therefore, the transmission volume under a certain time is based on the number of rotations of the pump head. However, in practice, it seems difficult to achieve high accuracy, even a few percent deviation. Such deviation is caused by many changing process conditions. One or more of these factors, such as temperature, pressure change, air retention and component wear, may affect the amount of liquid pushed by the pump head each time it rotates, resulting in small errors. However, when it rotates continuously for a period of time, it will lead to considerable flow deviation.
(3)Setting time: the total running time set for the conveying mode. When the time is up, the machine stops working. If set to 0, it will run continuously after startup.At this time, the external switch signal can also control the program
(4)Working time: the current running time of Displacement mode
4-6, External control mode
(1) In quantitative mode: start using when the quantity is set to 0..
(2) In conveying mode: start using when the time setting is all 0.
No pulse, high precision - the external gear design makes the pump flow relatively unaffected by the system pressure, and the flow output has no pulsation, which can accurately measure the flow, and has strong repeatability.
Stable transmission - gear transmission can ensure constant instantaneous transmission ratio.
Zero leakage - no packing seal or mechanical seal, no wearing parts, using magnetic drive, static seal, truly achieve zero leakage
Corrosion resistance - 304 / 316L, Hastelloy and engineering plastics can be selected as pump body materials, which can be used in most chemical media.
Efficient and convenient, long service life --- adopt the way of motor direct drive, reduce the vulnerable parts. High efficiency and energy saving, simple maintenance, low installation cost, long service life.
Applicability: suitable for high differential pressure, high system pressure and wide range of medium viscosity.
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Diversified drive mode --- magnetic drive gear metering pump can be directly connected with DC brushless motor, 2-pole and 4-pole AC motor without reducer. The flow control of the pump can be realized by the controller of AC, DC, brushless DC and other motors. We can provide a variety of standard driving methods to meet the needs of customers.
A wide range of applications - magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
All kinds of additives, high precision fluid transportation, high repeatability, continuous small flow without pulsation
It is used in aviation equipment, aircraft, spacecraft, chemical laboratory, chemical reagent adding, film manufacturing, pharmaceutical machine equipment, various lasers, micro cooling device of sighting instrument, tobacco flavoring adding, inkjet printing machine manufacturing, inkjet printer manufacturing, high-performance color printing machine and other industries
| Industrial machinery and equipment | Water treatment | Food and cosmetics |
| Inkjet printing/painting | Mask making | Food and Beverage filling |
| Oil transportation | Booster pressure | Filling of perfume cosmetics |
| Sand mill/Grinding | Circulating cooling | Quantitative Transport |
Suzhou Macxi Fluid Technology Co., Ltd. was established in 2014. Since the establishment of the company, we adhere to the concept of innovation and forge ahead. Our company is mainly engaged in the development, production and sales of pumps. Main magnetic drive micro gear pump, with an annual output of 100000 gear pump production capacity. The company has been committed to the optimization of product structure, improvement of service life and customization according to customer requirements, so as to improve the competitiveness of products for supporting manufacturers. We are looking forward to providing more high-quality products and services for more domestic and foreign users.
1. Q: Are you a manufacturer or trading company?
A: We are a manufacturer specializing in the development, production and sales of pumps. Our product has passed the test.
2. Q:What's your products MOQ?
A: Different model has different MOQ, please check with our salesman.
3. Q: How can I get some samples?
A: Usually we can't offer free sample, please pay the sample and express fee.
4 Q: What's your delivery time?
A: 1.The samples can be sent out within 5-7 days.
2.The batch order can be shipped out within 7-15 days after get your payment.
5 : Q:What's your warranty & after sale service policy?
A: 12 Months for all products starts from delivery date.
6 Q: How many qty so I can get your OEM service with myself brand name?
A: Different Models have different MOQ requirement, please consult our salesman.
7 Q: What's the payment can you accept?
A:Usually we accept T/T , also RMB transfer in China.
){kind=link}