Attentions:
1.400 Mesh filter shall be installed at the inlet of gear pump.
2.Before using, squeeze in a small amount of medium to lubricate the gear from the gear pump inlet.
Product Model Selection Instruction:
| Pump Head |
Motor |
| M |
3.00 |
F |
115 |
Y |
0.75KW |
| "M" means by magnetic drive |
Pump revolution, Unit: ml/rev, note 1 for details |
Pump body materials, note 2 details |
Pump head spec, Unit: mm |
Motor Type, Note 3 |
Motor Power |
Notes:
1. Pump output volume:3.0,6.0,8.0 (Unit: ml/rev)
2."F" means pump body material is PTFE, The gear is made of PTFE,The gear shaft is made of ceramic and sealing material Material FFKM,rotor plastic ETFE.
3.Motor: Y:Common asynchronous motor; YB:Explosion proof asynchronous motor; YP: General asynchronous frequency conversion YBP: Explosion proof asynchronous frequency conversion
Product Model : M3.00F115Y0.75KW4P
Product Diagram:
Product Parameters:
| Pump Model |
Motor Type |
Motor Base |
Weight(kg) |
Imp.&Exp. Size |
Rated Flow (L/H) |
| 2 Pole |
4 Pole |
| M3.00F115 |
Y0.75KW |
80 |
11.6 |
G1/2 |
504 |
252 |
| M6.00F115 |
1008 |
504 |
| M8.00F115 |
G3/4 |
1344 |
672 |
| Pump Head Parameter |
Motor Parameter |
| Continuous work pressure |
1.0MPa |
Rated Power |
Three-Phase 380V/220V |
| Fluid Viscosity |
0.2-5000cps |
Rated frequency |
50HZ |
| Ambient Temperature |
0ºC-70ºC |
Protection Level |
IP55 |
| Static sealing |
FFKM |
Working system |
Continuous |
| Pump Body material |
PTFE |
|
|
| Gear Material |
Gear PTFE, gear shaft ceramics |
|
|
The values in this table are for reference only.
Remarks:
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.
Pump head structure diagram:
1. Inner-hexagon screw*4 5. Pin*2 9. Rear cover 13. Countersunk head screw*4
2. Front cover 6. Driving gear 10. O-ring 2 14. Isolation cover
3. O-ring 1*2 7. Driven gear 11. Internal magnetic steel
4. Shaft sleeve*5 8. Pump body 12. Platen
Product characteristic diagram:
Product Characteristics:
No pulse, high precision.
the external gear design makes the pump flow relatively unaffected by the system pressure,and the flow output has no pulsation, which can accurately measure the flow, and has strong repeatability.
Stable transmission.
Gear transmission can ensure constant instantaneous transmission ratio.
Zero leakage.
no packing seal or mechanical seal, no wearing parts, using magnetic drive, static seal,truly achieve zero leakage.
Corrosion resistance
304 / 316L, Hastelloy and engineering plastics can be selected as pump body materials,which can be used in most chemical media.
Efficient and convenient, long service life
adopt the way of motor direct drive, reduce the vulnerable parts. High efficiency and energy saving, simple maintenance, low installation cost, long service life.
Applicability.
suitable for high differential pressure, high system pressure and wide range of medium viscosity.
long service life.
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Diversified drive mode.
magnetic drive gear metering pump can be directly connected with DC brushless motor,2-pole and 4-pole AC motor without reducer. The flow control of the pump can be realized by the controller of AC, DC, brushless DC and other motors. We can provide a variety of standard driving methods to meet the needs of customers.
A wide range of applications.
magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
Applicable conditions:
All kinds of liquids, high precision fluid transportation, high repeatability, continuous small flow without pulsation.
It is used in aviation equipment, aircraft, spacecraft, chemical laboratory, chemical reagent adding, film manufacturing, pharmaceutical machine equipment, various lasers, micro cooling device of sighting instrument,tobacco flavoring adding, inkjet printing machine manufacturing, inkjet printer manufacturing, high-performance color printing machine and other industries.
| Industrial machinery and equipment |
Water treatment |
Food and cosmetics |
| Inkjet printing/painting |
Mask making |
Food and Beverage filling |
| Oil transportation |
Booster pressure |
Filling of perfume cosmetics |
| Sand mill/Grinding |
Circulating cooling |
Quantitative Transport |
Company Profile:
Suzhou Macxi Fluid Technology Co., Ltd. was established in 2014. Since the establishment of the company, we adhere to the concept of innovation and forge ahead. Our company is mainly engaged in the development,production and sales of pumps. Main magnetic drive micro gear pump, with an annual output of 100000 gear pump production capacity.The company has been committed to the optimization of product structure, improvement of service life and customization according to customer requirements, so as to improve the competitiveness of products for supporting manufacturers. We are looking forward to providing more high-quality products and services for more domestic and foreign users.
Audited Supplier 
){kind=link}
){kind=link}